No files available for this product.
Professional characteristics
Product name: Street solar candelabra 1-arm design
Product type: SLK-P-10
Technology: stand-alone LED technology street lighting
Certification: CE (European Conformity)
Applied standard: MSZ EN 13201
Lighting body
10W Led 180 lumen / Watt
SMD LED with optics IP65
Color temperature: natural white 4000K
Output light output: 1800 lumen 10W
Operating voltage: low voltage
Operating temperature: – 25 °C + 50 °C
Illumination angle: 60°ver x 140°hor
Mechanical dimensions: 520mm x 240mm x 100mm
Base material: aluminum with sinter protection, tempered glass.
Impact resistance: IK 08
Charge control electronics
Mppt charge controller with intelligent Led driver. It is possible to recover the luminous flux of the consumer in 1 lighting cycle within a given time range.
Input voltage: 12 /24 V
Load capacity: maximum 15A
Overcharge protection and deep discharge protection
Enclosure: IP 68
Operating temperature: – 40 °C + 85 °C
Battery
1 pc MWL 12V 60Ah AGM maintenance-free battery
Operating temperature: – 10 °C (- 20% CA) + 55 °C (0% CA)
Installation: In an anchorage recessed into the ground in an insulated support frame
Candelabra column
5000 mm high, three-stage narrowing galvanized steel candelabra column, (outdoor
with sinter coating).
With a light spot height of 4500 mm
Base plate: 450x450x10mm, hot-rolled steel sheet
Fixation: M16 galvanized 8.8 hardness steel screws.
Warranty and service
12 years for solar panels at 91.2% performance, 20 years for 80.6% performance.
Battery: 3 years
Control: 3 years.
Lamp body: 3 years.
Column: 5 years for galvanized, 3 years for sintered design.
The warranties only apply to the streetlights installed by us!
When fully charged, our product operates 12 hours a day, and works for 8-10 days without charging!
The installation of solar streetlights does not require a network permit, there is no need for a network connection, and their operation is completely maintenance-free and cost-free.
