No files available for this product.
Professional characteristics
Product name: Street solar candelabra 1-arm design
Product type: SLK-N-10
Technology: stand-alone LED technology street lighting
Certification: CE (European Conformity)
Applied standard: MSZ EN 13201
Lighting body
10W Led
CREE LED IP65 with optics
Color temperature: natural white 4000K
Output light output: 1650 lumens 10W
Operating voltage: low voltage
Operating temperature: – 25 °C + 50 °C
Illumination angle: 60°ver x 135°hor
Mechanical dimensions: 250mm x 75mm x 55mm
Charge control electronics
Mppt charge controller with intelligent Led driver. It is possible to recover the luminous flux of the consumer in 1 lighting cycle within a given time range.
Input voltage: 12 /24 V
Load capacity: maximum 15A
Overcharge protection and deep discharge protection
Enclosure: IP 68
Operating temperature: – 40 °C + 85 °C
Battery
1 pc 12V 90Ah AGM maintenance-free battery
Operating temperature: – 10 °C (- 20% CA) + 55 °C (0% CA)
Placement: In an anchorage recessed into the ground in an insulated support frame
Candelabra column
6300 mm high, 100x100x3 mm closed section steel candelabra column, with outdoor sinter coating
5300 mm light spot height
Base plate: 450x450x10 mm, hot-rolled steel sheet
Fixation: M16 galvanized 8.8 hardness steel screws.
Warranty and service
12 years for solar panels at 91.2% performance, 20 years for 80.6% performance.
Battery: 3 years
Control: 3 years.
Lamp body: 3 years.
Column: 3 years for sintered design.
The guarantees only apply to the streetlights installed by us!
When fully charged, our product operates for 12 hours a day and works for 8-10 days without charging!
The installation of solar streetlights does not require a network permit, there is no need for a network connection, and their operation is completely maintenance-free and cost-free.
