No files available for this product.
Professional characteristics
Product name: Street solar lamp, 1-arm design
Product type: SLK-T-10/18 with motion sensor
Technology: stand-alone LED technology street lighting with 360-degree beam angle luminaire
Certification: CE (European Conformity)
Applied standard: MSZ EN 13201
Lighting fixture
10W / 18W Led 135 lumen / Watt
SMD LED IP with optics
Color temperature: natural white 4000K
Output light output: 1350/2430 lumen 10/18W
Dimensions: diameter 520 mm
Operating voltage: low voltage
Operating temperature: – 25 °C + 50 °C
Charge control electronics
Mppt charge controller with intelligent Led driver. Within a given time range, it is possible to recover the consumer’s luminous flux in 1 lighting cycle.
Input voltage: 12 /24 V
Load capacity: maximum 15A
Overcharge protection and deep discharge protection
Enclosure: IP 68
Operating temperature: – 40 °C + 85 °C
Battery
1 pc 12V 60Ah AGM maintenance-free battery
Operating temperature: – 10 °C (- 20% CA) + 55 °C (0% CA)
Installation: Ground anchor in insulated support frame
Candelabra pole
4300 mm high, galvanized steel candelabra pole, (outdoor
with sinter coating).
Base plate: 450x450x10mm, hot-rolled steel sheet
Fixation: M16 galvanized 8.8 hardness steel screws.
Warranty and service
Battery: 3 years
Control: 3 years.
Lamp body: 3 years.
Column: 3 years for sintered design.
The warranties only apply to the streetlights installed by us!
When fully charged, our product operates for 12 hours a day and works for 8-10 days without charging!
The installation of solar streetlights does not require a network permit, there is no need for a network connection, and their operation is completely maintenance-free and cost-free.
