No files available for this product.
Professional Features
Product Name: Street Solar Candle Holder, 1-arm design
Product Type: SLK-N-20 Double
Technology: Standalone LED Street Lighting
Certificate: CE (European Conformity)
Applied Standard: MSZ EN 13201
Lighting Fixture
20W LED
CREE LED with IP65 Optics
Color Temperature: Natural White 4000K
Output Brightness: 1650 Lumens 15W
Operating Voltage: Low Voltage
Operating Temperature: -25°C + 50°C
Illumination Angle: 60° Up x 135° Horizontal
Mechanical Dimensions: 250mm x 75mm x 55mm
Charge control electronics
MPT charge controller with intelligent LED driver. It is possible to recover the luminous flux of the consumer during 1 lighting cycle, within a given time range.
Input voltage: 12 /24 V
Load capacity: maximum 15A
Overcharge and deep discharge protection
Protection: IP 68
Operating temperature: – 40 °C + 85 °C
Battery
1 pc 12V 90Ah AGM maintenance-free battery
Operating temperature: – 10 °C (- 20% CA) + 55 °C (0% CA)
Location: On an anchorage recessed into the ground, in an insulated support frame
Candelabra pole
6300 mm high, 100x100x3 mm closed-section steel candelabra pole, with outdoor sintered coating
5300 mm light spot height
Base plate: 450x450x10 mm, hot-rolled steel sheet
Fixation: M16 galvanized 8.8 hardness steel screws.
Warranty and service
12 years for solar panels at 91.2% performance, 20 years at 80.6% performance.
Battery: 3 years
Control: 3 years.
Lamp body: 3 years.
Pole: 3 years for sintered design.
Warranties only apply to street lights installed by us!
When fully charged, our product works for 12 hours a day, and for 8-10 days without charging!
The installation of solar street lights does not require a network permit, there is no need for a network connection, their operation is completely maintenance-free and free of charge.
